We manufacture, supply and export a wide range of Roller Burnishing Tools to our clients for various applications. Our vast range of Roller Burnishing that we provide to our clients are divided into four segments that are ID Roller Burnishing Tools, OD Roller Burnishing Tools, Flat Surface Roller Burnishing Tools and Taper Roller Burnishing Tools. Our products works based on application diameter and length various tool designs are made available to our clients.
|Description of Internal Diameter Roller Burnishing Tool|
|Internal DiameterRange||The minimum internal diameter burnishing range starts from 5mm and above. Though there is no limitation on the maximum diameter, for practical purposes we have limited the tool diameter.|
|Burnishing Length||Standard Burnishing Lengths are available to suit the regular applications. However tools with customized burnishing lengths can be manufactured according to the part requirement.|
|Internal Diameter Adjustment||The diameter of the roller burnishing tool can be adjusted to a limited range for the purpose of setting the diameter initially. The adjustment range varies depending upon the size of the tool.|
|Shank||Tool holding Shanks are available in Morse Taper (MT), Straight/Round, BT or any other as per the request.|
|Job Material||Any Ferrous or Non-Ferrous item can be burnished. Normally ferrous materials with a maximum natural hardness of 35HRc are recommended for burnishing operation. Heat Treated jobs are not recommended for burnishing process.|
|Machine Used||Internal Roller Burnishing Tools can be fitted for use in any spindle driven machine. Normally these tools can be used in CNC Turning centers /Vertical Machining center /Conventional Lathes /Pillar drilling machines or any other Special purpose machinery. Special Internal Roller Burnishing Machines are used for higher productivity.|
How to Selecte Internal Diameter Roller Burnishing Tool?
1-Tool Body Selection
At sight to the table, select the body number proper to the tool diameter.
Define the diameter accurately which you will process (for example 25,40 …).
3-Process Type Selection
Select the process type according to machine and workpiece.
1: Automatic feeding (self-feeding) for through holes
2: Machine feeding (not self-feeding) for through holes
3: Machine feeding (not self-feeding) for blind holes
4- Rolling Length Selection
Define the rolling length which is proper for the workpiece
- It doesn’t need to be stated for bigger than Ø34 mm diameter because they have an unlimited rolling length but it must be stated smaller than Ø35 mm diameter.
- Standard rolling length is 50 mm for smaller than Ø35. For these diameters other rolling length options are 100, 150, 200, 250, 300 mm.
- For the diameters of smaller than Ø35 more longer rolling length demands will be considered specifically.