Menu

Tag: burnisher

How to adjust the diameter of roller burnishing tool?

No Comments
| Categories: RBT News
Buy ID Through Hole Roller Burnishing Tool, ID Through Hole Roller Burnishing Tools Exporter, ID Through Hole Roller Burnishing Tools Manufacturer, ID Through Hole Roller Burnishing Tools Supplier

Many machine parts factories use roller burnishing tool to burnish the surface of products. The products have various sizes. Therefore, roller burnishing tools also have various sizes. In different process, there will be need to adjust the diameter of the tool, so how should the diameter of the roller tool be adjusted? RBT has accumulated a lot of experience in this field. Now, let's introduce some key points of diameter adjustment. Of course, we also welcome you to choose quality...

Read More

The structure and characteristics of double rod roller burnishing tool.

No Comments
| Categories: RBT News
roller burnishing tool, burnishing process, burnishing operation, burnish technologies, internal roller, finish roller

(figure 1)   As shown in figure 1, the structure of double rod roller burnishing tool: Lathe tool cutter bar Rolling cutter bar artifacts rest pin Adjust the bolt   1. Good rigidity. When using the double rod roller burnishing tool, the two tool bars are clamped on the square tool holder, and the overhanging length L can be adjusted according to the workpiece size. Therefore, it can greatly improve the rigidity of the pole.   2. Adjustment and control...

Read More