Menu

Tag: rolling process

The roller burnishing process affects performance analysis of bearing bush

No Comments
| Categories: RBT News
The roller burnishing process affects performance analysis of bearing bush

Bearing bush(red copper is the main material), the energy consumption is obviously reduced in the working process of press. Energy consumption represents motion resistance, which can be represented by the coefficient of friction. The friction coefficient in general physics is defined as the ratio of sliding resistance to contact pressure when two objects in contact produce sliding. [caption id="attachment_7066" align="alignnone" width="728"] The roller burnishing process affects performance analysis of bearing bush[/caption] The classic Coulomb's Friction has been used since 1785...

Read More

The considerations in processing cast iron with roller burnishing tools.

No Comments
| Categories: RBT News
How to use RBT roller burnishing tool roller burnishing process

Buy Roller Burnishing Tool The principle of rolling process is simply to extrude the surface of the workpiece with hard objects and to smooth the ripples left by the cutting process on the workpiece surface. And the internal main component of the cast iron workpiece's material is graphite (powder), plus a part of iron and other metals. As for the precision of roller pressure, roller burnishing tools is used to adjust the size of the tool by manually screwing the...

Read More

The parameters of roller burnishing process

No Comments
| Categories: RBT News
FIG. 1 The clamping diagram of roller burnishing tools

Selection of process parameters   Magnitude of interference Magnitude of interference quantity size determines the size of the rolling pressure, fluid rolling pressure increases with increasing as the magnitude of interference. Magnitude of interference quantity should not only consider the selected by the uneven plastic deformation of the surface of the workpiece, but also want to consider the change of cylinder diameter size. If the roughness is to be reduced, can be selected with a smaller value, not exceeding the...

Read More

How to use RBT’s roller burnishing tool to improve the smoothness of products?

No Comments
| Categories: RBT News
What is the process of improving the smoothness of the product with roller burnishing tool by RBT?

Abstract: this paper mainly introduces the process parameters, technology and operation of rolling tool in order to improve the smoothness of products. Through the introduction of this article to explain how to improve the surface of the workpiece after rolling pressure, the surface of the workpiece is not clean, the traces of rolling, and so on.   Before the roller burnishing tool was widely used, many factories used polishing, honing, grinding and other techniques to improve the surface finish of...

Read More

How to solve the problems existing in Roller Burnishing Tools?

No Comments
| Categories: RBT News
roller burnishing tools - Extrusion burnishing schematic diagram

In rolling process, all kinds of Roller Burnishing Tools are necessary, whether Roller and Burnishing Tools or Flat Surface Roller Burnishing Tools. It is important to choose the right tools in the process. However, after a long period of use, we can find that there are some problems in the use of Roller Burnishing Tools, the wall thickness and hardness of the processing are required. Let's get to know each other.   The wall thickness of the processing part. Roller...

Read More

Processing technical of Inside Diameters(Holes) Roller Burnishing

No Comments
| Categories: RBT News
Processing technical of Inside Diameters(Holes) Roller Burnishing

The principle of inner hole rolling technique is the same as that of external rolling pressure. Because of the high productivity of roller burnishing process, honing is often replaced by rolling process. After the inner hole rolling pressure, the accuracy is within 0.01mm, and the surface roughness Ra is 0.16m or more. Rolling processing is very sensitive to the density, soft and hard uniformity of materials, and the uneven quality of materials can seriously affect the rolling quality. The rolling...

Read More

What is the processing method and processing condition of roller burnishing tool?

No Comments
| Categories: RBT News
What is the processing method and processing condition of roller burnishing tool?

The rolling process is to contact the high hardness and smooth roller with the metal surface, after the local microplastic deformation of the surface layer, the surface roughness is improved by plastic machining. Roller burnishing tool, also called roller burnishing surface finish, rolling cutter, rolling head, finish roller, tool roller,  surface roller, rolling squeeze head and roll extrusion head, mirror tools, rolling tool, roll to squeeze knife,  rolling reamer, cutter roller, burnishing drill such as a variety of names. Because...

Read More