Menu

Tag: rolling tool

How to use RBT’s roller burnishing tool to improve the smoothness of products?

No Comments
| Categories: RBT News
What is the process of improving the smoothness of the product with roller burnishing tool by RBT?

Abstract: this paper mainly introduces the process parameters, technology and operation of rolling tool in order to improve the smoothness of products. Through the introduction of this article to explain how to improve the surface of the workpiece after rolling pressure, the surface of the workpiece is not clean, the traces of rolling, and so on.   Before the roller burnishing tool was widely used, many factories used polishing, honing, grinding and other techniques to improve the surface finish of...

Read More

The finishing method of skiving and burnishing on workpiece surface

No Comments
| Categories: RBT News
Skiving and Roller burnishing Tools, Honing and its trajectory

Skiving burnishing is a method of finishing the hole with the honing head of rolling tool. The honing head of Roller burnishing Tools is driven by the main shaft of the machine tool, and it is rotated at low speed while moving up and down. The honing head is equipped with a number of roller grinding strips to pressure on the surface of the workpiece. When rolling the honing head, a thin layer of metal is cut from the workpiece....

Read More

How to replace the wear parts of the roller burnishing tool?

No Comments
| Categories: RBT News
How to replace the wear parts of the roller burnishing tool?

There are some wear parts to be replaced in the use of burnishing tool, and the specific methods are as follows: Replace the mandrel: The mandrel and shank of the roller burnishing tool are connected by housing nut. Rotate the core to the left when replacing the core axis, then remove the mandrel from the handle of the tool.   The structure of the roller burnishing tool:   Rolling pin holder replacement: The housing nut to the left rotating frame,...

Read More

What is the processing method and processing condition of roller burnishing tool?

No Comments
| Categories: RBT News
What is the processing method and processing condition of roller burnishing tool?

The rolling process is to contact the high hardness and smooth roller with the metal surface, after the local microplastic deformation of the surface layer, the surface roughness is improved by plastic machining. Roller burnishing tool, also called roller burnishing surface finish, rolling cutter, rolling head, finish roller, tool roller,  surface roller, rolling squeeze head and roll extrusion head, mirror tools, rolling tool, roll to squeeze knife,  rolling reamer, cutter roller, burnishing drill such as a variety of names. Because...

Read More

How to use a burnishing tool?

No Comments
| Categories: RBT News
How to use RBT roller burnishing tool roller burnishing process

How to use a burnishing tool? Before using the roller burnishing tool, read the following instructions carefully and carefully. If you still do not understand after reading, please contact our online service staff, our technical staff will give you detailed instructions. Operation method: Roller Burnishing Process Install the rolling head on the end seat of the machine tool. The rolling head does not rotate and the workpiece turns. Or the rolling head is installed on the main shaft, the rolling...

Read More

Using roller burnishing tool can improve the finish of aluminum alloy material

No Comments
| Categories: RBT News
Using roller burnishing tool can improve the finish of aluminum alloy material

With economic development, transportation is also convenient, and all kinds of vehicles are becoming more and more popular. Among them, the convenient transportation vehicle is popular. Because of car parts processing is highly precision and rigor, the application of the Roller Burnishing Tool solves the problem of rough machining of aluminum alloy and provides a good guarantee for the processing of aluminum alloy parts. Using roller burnishing tool can improve the finish of aluminum alloy material Roller Burnishing Tools process...

Read More

How does the Roller Burnishing Tool process the inner hole of the bearing?

No Comments
| Categories: RBT News
How does the Roller Burnishing Tool's process the inner hole of the bearing

Because of the improvement of industrial level, various kinds of mechanical transmission are increasing, so the bearing type workpiece is widely used. The workpiece of the bearing class is all used for the mechanical transmission of high precision and high speed, but the direct cause of the transmission is its roughness. Whether the inner hole or outer diameter, the mechanical transmission has higher requirements for the smooth finish of the bearing. However, while improving and improving the smoothness of the...

Read More